PM series balances are equipped with an innovative measuring system based on MonoBLOCK™ technology. This enables operation with readability of 0.01g at capacity of 15kg, and with readability of 0.1g at capacity of 50 kg.
Use of the new measuring system, guarantees stability of repeatability over time at a range sd<1d. The unique measuring system solution is characterized with great resistance to ambient conditions change.
An in-built 4-point protection system prevents balance overloading, this ensures safety in case too heavy load is applied onto the weighing pan.
Optionally the PM series balances can be powered with use of an internal battery).
-new MonoBLOCK™ sensor;
-unrivalled repeatability of indications;
-weighing of heavy loads with maximum accuracy;
-intuitive operation guaranteed by a membrane keyboard;
-compliance with CFR21;
-fast mass measurements;
-robust mechanical design – new lower weighing platform;
-improved ergonomics – two types of weighing terminal for selection.
|Capacitatea maxima [Max]||35,1 kg|
|Capacitatea maxima [Max]||35 kg|
|Minimum load||5 g|
|Tare range||-35,1 kg|
|Repeatability at low load||0,04 g|
|Repeatability at nominal load||0,1 g|
|Sensitivity drift||2 ppm/°C in temperature +15 ÷ +35°C|
|Minimum weight (USP)||82 g|
|Minimum weight (U=1%,k=2)||8,2 g|
|Stabilization time||3 s|
|Power supply||12 ÷ 16 V DC|
|Working temperature||-10° - +40 °C|
|Preload range||3,5 kg|
|Pan Size||347×259 mm|
|Interface||2×USB, 2×RS 232, Ethernet, Wi-Fi, 4Inputs/4Outputs|